-
- TRL (Technology readiness level) -
-
- Titre Frequency selective light coupling and decoupling device
- Description The invention concerns a frequency selective light coupling and decoupling device based on a multimode photonic crystal waveguide. If a signal is injected on its fundamental mode, it is converted into a higher-order mode inside the structure. Then, this higher-order mode is outcoupled without perturbing the fundamental mode by thinning to a few rows the lateral photonic crystal cladding on one side (or both sides). The wave leaks as a local plane wave that can be channelled to the next device on a chip. Multiple channels are implemented at successive locations along the waveguide by simply varying the width of the waveguide (or the axial period of the photonic crystal), once every 10 to 100 crystal periods typically, and possibly by providing short “dead zones” between such sections to celan up the signal. The system may also be used as a combiner (reciprocity) or as a wavelength monitor if photodiodes are implemented monolithically at the selected channel positions, just aside the waveguide.
- Bénéfices For demux applications, this system can compete with microdisks and other in-plane selective elements. One advantage is the structural integrity, there is no full gap to etch between guide and disk. It can also operate at modest Q (~50-200), which is difficult for microdisks. Once the crystal hole size is mastered, the series of demultiplexed wavelength can be chosen at will with great accuracy and in any order, which is also an advantage on PHASAR. Signals at non-dropped wavelengths are virtually unaffected. The implementation can be quite compact, 5×30 micron for coarse WDM channels, per channel, hence 5×240 micron for an N=8 channel function (ie the same area than N typical 5×30 µm photodiodes). It works equally well on InP, GaAs and SoI cases, and could also be used at mid infrared wavelengths down to THz systems. The picture below shows the implementation made on SoI in a polrisation-diversity demux chip, in the framework of the EU IST FUNFOX 04582 FP6 project, notably with collaboration from Ghent University (with IMEC) and St Andr’ews university for these particular realisations. The device is nicknamed “TAMIS demultiplexer” Tamis being the French for “sieve”.
- Nouveauté This device can be used for demultiplexing. The output wavefront is not optimized in the standard version, so that dropping the signal to photodiodes is a preferred option to make good use of the device according to the invention. However, focussing structures can be envisioned.
It can be used for wavelength monitoring “online” by dropping channels to the device (or only part thereof). It can also be used to stabilize the wavelength of a tuneable laser, by providing sufficient data for proper feedback [4].
Applications can be on InP, GaAs or SoI substrates, or even other systems.
- Mots clés coupling and decoupling device, signal, optic, photonic crystal
- Secteurs NICT
